Is replacing a nivito easy? It depends on what you have to do. Some people are able to handle this task without a lot of assistance. However, some parts of the job may be more difficult to replace than others. Here are some tips to make the job easier. You should always turn off the water supply before you begin. If you are removing a damaged faucet, turn off the water supply valve first.
Disconnect the water supply
Remove the existing faucet. It's relatively easy to disconnect the water supply to the old faucet. It's located under the sink. Look for the On/Off valves on the hot and cold water supply lines. Disconnect the faucet from the sink and unhinge the nuts. Next, use a putty knife to break the old faucet free. Be careful not to scratch the sink while removing it. Finally, install the new kitchen tap.
The supply tube can be routed through the cabinet using a basin wrench. This wrench is made specifically for this purpose. It is used to loosen and tighten difficult-to-reach faucet fasteners. The plastic Wing-Nuts are designed to provide leak-free service for years. These valves are connected to the underside of the faucet. If you have a hard time reaching these fasteners, a basin wrench will come in handy.
Choose the style
Once you've removed the old faucet, install the new one. Ensure the new one is the same as the old one. If you're not sure what style to choose, take a photo of the current faucet so you can guide your selection. Also, remember that if the old faucet isn't leaking, the replacement will be even easier. You'll be surprised at how easy it is to install a new kitchen faucet.
Use a putty knife
Before you begin, you need to know how to install the new faucet. Generally, it doesn't require any special tools. The only thing you need is a drill and a hammer. You can also use a putty knife to cut the old faucet. After removing the old one, you can clean the sink area with a rag. Once you've done this, you're ready to replace the new faucet.
Shut-off valves
During the replacement process, it's important to remember that the faucet is a vital part of a home. When you're replacing it, you should turn off the shut-off valves to prevent the water from leaking. You should also use bright lighting to make the job easy. Then, you'll need to remove the old faucet by unscrewing the nuts under it. Afterwards, you'll need to follow the instructions on the new faucet to ensure it's installed properly.
